Showing posts with label Plex. Show all posts
Showing posts with label Plex. Show all posts

Easy installation Plex Media Server Raspberry Pi 3 + Image

 

Install Plex Media Server on Raspberry Pi 3. 

Thanks to the work of uglymagoo on the Plex forum it is very easy to install Plex using the Synology armv7 package (now it uses the ReadyNAS package). The previous Raspberry Pi 2 guide became quite long and cluttered, this one aims to be cleaner. 

There is a Plex Media Server Raspberry Pi 3 image based on the minimal Raspbian distro Minibian at the bottom of this post with the required modification to force Plex transcoding if you just want to test if Plex on the Raspberry Pi 3 will suit your needs. This tutorial assumes you are running Raspbian Jessie. This how-to also has a section on fixing Plex permissions so if your Plex can’t see your folders then you will be able to solve that problem here.Install Plex Media Server on Raspberry Pi 3Installation Checklist 

For the best performance for Plex Media Server on the Raspberry Pi 2 refer to this checklist

  • Verify you have the en_US locale
  • Make sure you have libexpat1 installed
  • Do not use WiFi if you want the best result
  • Monitor Plex Media Server and restart it automatically with this guide.

  • Do not use Plex.tv instead use Dynamic DNS and a reverse proxy with this guide to avoid transcoding problems.
  • If you are having transcoding issues try using an older transcoder with this guide.
Pre-Install Requirements Generate Locales 

First we need to verify the en_US locale is enabled 

This command lists current localeslocale -a 
My output looks like thisC C.UTF-8 en_US.utf8 POSIX 

If you don’t have en_US.utf8 you can generate it 

To generate the locale edit the locale generator configuration file first to enable the localesudo nano /etc/locale.gen 

Uncomment this line by deleting the ## en_US.UTF-8 UTF-8 

Ctrl+X, Y and Enter to save 

Now generate the localessudo locale-gen 

If you get the locale-gen cannot be found error this should solve itecho "export PATH=$PATH:/usr/sbin" >> ~/.profile 

Now generate the locales again if locale-gen wasn’t foundsudo locale-gen 

Reconfigure locales for good measure (source)sudo dpkg-reconfigure locales 

Now run locale to list themlocale 

If you see these errors (on Jessie Lite) follow the next steplocale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory 

Open your environment filesudo nano /etc/environment 

Add these linesLC_ALL=en_US.UTF-8 LANG=en_US.UTF-8 

Ctrl+X, Y and Enter to SaveInstall Plex Media Server on Raspberry Pi 3 using Repository 

Enable https transport or you will get this error: E: The method driver /usr/lib/apt/methods/https could not be found.sudo apt-get update && sudo apt-get install apt-transport-https binutils -y --force-yes 

Grab uglymaoo’s gpg key for his repositorywget -O - https://dev2day.de/pms/dev2day-pms.gpg.key | sudo apt-key add - 

Add uglymagoo’s repositoryecho "deb https://dev2day.de/pms/ jessie main" | sudo tee /etc/apt/sources.list.d/pms.list 

Update your package listssudo apt-get update 

Install Plex Media Serversudo apt-get install plexmediaserver -y 

Upgrading Plex is as easy as running this command 

Note: The repository contains the latest non-Plex Pass version. If you want the Plex Pass version you will have to build it yourself using the manual method 3 outlined here.sudo apt-get update && sudo apt-get upgrade -y 

Check out additional hard drives for your mediaTranscoding Tools 

Plex Media Server requires a new libc6 module that you can pull from the jessie repo (thanks again to uglymagoo). This part may not necessary if you used the precompiled deb package at the top. Sometimes, if your end devices are low, your Plex can't pass-through some videos to play, you can transcode the video in advance with some video transcodersand put the converted video in sharing folder of Plex in advance. 

Install libexpat1 for help playing in the Android appsudo apt-get install libexpat1 -yFix Plex Permission Issues 

If Plex isn’t reading your drives or folders you can do one of two things, change the permissions of your external storage or change the user Plex is running as (which could mean you need to rescan for metadata). 

First try adding your plex user to your regular user’s group that owns the mount point for your hard drivesudo usermod -aG pi plex 

Then add your regular user to the plex group if the plex group existssudo usermod -aG plex pi 

Then set the permissions for the folder containing your media to 775 so the plex in the user’s group can read themsudo chmod -R 775 /folder/with/media 

If that still fails you can change the permissions where /mnt/usbstorage is your mount path for your hard drive so everybody can read, write and executesudo chmod -R 777 /mnt/usbstorage 

Alternatively you can change the user Plex runs as to your pi user 

To change which user Plex runs as, open this filesudo nano /etc/default/plexmediaserver 

Change this line, replace plex with your username you use to log on or the owner of the mounted drive, most likely piPLEX_MEDIA_SERVER_USER=pi 

Ctrl+X, Y and Enter to save 

Change the owner of your Plex folders to the user you are changingsudo chown -R pi:pi /var/lib/plexmediaserver 

Then restart your Plex serversudo service plexmediaserver restart 

If Plex still isn’t working see the manual installation guide.Raspberry Pi 3 Plex Media Server Image 

If you cannot see the unlocker whitelist this site in AdBlock 

Raspberry Pi Plex Media Server Images 

Spread the knowledge to get the Pi goodness 

For the Plex Media Server image, login with root, password htpcguides and use raspi-config to expand the file system, you can install WiFi drivers if they are not included in the kernelapt-get install firmware-linux-nonfree -y 

Enjoy Plex Media Server on your Raspberry Pi 3 

Source 

If you want to stream Blu-ray with Plex on your Raspberry Pi 3 based multimedia devices, here are some tutorials:

Below are some video tools that help you get more entertainment on Plex: 

 You Cloud Download Directly

Pavtube Video Converter Ultimate



An efficient, fast, safe, all-in-one Blu-ray DVD Backup & ripper and HD Video Converter

Free Trial Buy now
Pavtube ByteCopy



An Efficient, Safe, Fast, Easy-to-use Blu-ray DVD converter and Retain multiple audio tracks & subtitles

Free Trial Buy now

Pavtube BDMagic



Pavtube BDMagic is a easily and powerfully BD tool to make Blu-ray movie enjoying anywhere anytime as you like.

Free Trial Buy now
Pavtube DVDAid



A professional yet easy-to-use DVD backing up and ripping tool.

Free Trial Buy now

Related Articles: 
Source:http://device-camcorder-tips.blogspot.com/2016/09/install-plex-media-server-raspberry-pi-3-image.html